Car Inspection: How Long Does a Car Inspection Take?

Car inspection is a must before you buying or selling vehicles. If you are thinking of buying a new car, you must know about car inspection and how long a car inspection takes. Going for a car inspection is essential whether you are purchasing a used car or a new one.

Inspection can vary depending on the condition of your vehicle. For example, if your car requires more work than usual, it might take a longer time for inspection. In this article, we will guide you through everything that you need to know about Car inspection.

What is a car inspection?


Car inspection is the process to check a car’s condition and is also a part of the car insurance process. An inspector tests all components of your vehicle and ensures that they are performing correctly. If not running correctly, they will recommend you to replace it.

It’s essential to perform a car inspection routinely every two years. If your car is older than ten years, you might need to inspect your vehicle more frequently. It ensures that your vehicle regularly meets the required standards, reduces breakdowns and accidents due to maintenance-related faults.

Why is Car Inspection Important?


Car inspection is a must if you are a dedicated and conscious car owner. However, it takes time to perform a complete inspection depending on the state you are operating. Still, if your first choice is safety, we recommend you go for a full car inspection regularly to confirm your safety.

You might question how car inspection confirms your safety and how long does a car lasts? Well, While checking your vehicle, each physical part of your vehicle, such as brakes, fuel system, wheels horn, engine, etc., are examined to make your car safe and sound go for a drive.

Moreover, The inspection is not an optional process. If your car doesn’t meet all the requirements by your state, then driving the car on the road is an offense. So, inspection is essential to ensure that your vehicle is roadworthy as intended by your state.

What are Car Safety And Emissions Inspections?


Car safety and emissions are two things that are tested during a car inspection. Car inspections ensure that the car is safe to drive and emits acceptable pollutants to the air. If any single part of your car is damaged or does not meet the standard level, you must settle the point to pass the inspection.

The emission inspection process ensures that the car is not crossing the legal level of air pollution. In addition, it ensures that the exhaust system is functioning correctly and the smoke coming from it is not black nor white.

How will you know that your car passed inspection or not?


One the inspectors complete the inspection of your car, they will let you what your car’s condition is. Primarily, they provide a detailed result of your vehicle immediately. They will brief you about the areas that your car passed and what needs to be changed or replaced to improve the efficiency of your car.

After your car passes the inspection successfully, they will place an allowed inspection sticker on your vehicle to indicate that it is in good condition. The sticker carries a validation date, usually for one or two years. Before the date crossed, you should perform another vehicle inspection.

What should you do if your car failed in Vehicle Inspection?


Not to worry. If your car failed to pass a vehicle inspection, that doesn’t mean they will throw your car into the garbage. Firstly, they will brief you about why your car failed to pass and provide a detailed report of the parts that caused your vehicle to fail.

In most cases, the inspectors offer to fix your car and ensures your car will meet the requirements to pass. If the inspector doesn’t offer you repair, you will receive an official limited period to repair your car from another place and perform inspection again.

There’s a fact you need to know that you won’t be allowed to drive your car if it failed in vehicle inspection. This is because every state requires a valid vehicle registration. So you have to mention the areas that your vehicle failed in; otherwise, you won’t get a proper valid registration. Driving without a genuine registration can push you into many problems, such as license suspension.

What are the reasons behind failed car inspections?


You might know that a bit of component of your car can play a more significant role depending on the situation. So, the tiny parts are not ignorable things. That’s why a little thing can be the reason behind the
physical inspection failure of a vehicle. 

Here are some common issues that can lead your car to fail in vehicle inspection:


Blocked Filter


This is one of the most common reasons that can fail your inspection because this can pass a high level of hydrocarbons which is not suitable for your car’s engine. Generally, it got jammed if you have not changed the filter for a long time.

Faulty oxygen sensor


The oxygen sensor is an essential element for your car engine. It balances in air and fuel ratio. If it fails to keep the balance, the machine can’t adjust the oxygen ratio. So, defective oxygen sensors can lead your car to fail vehicle inspection.

Poor tire condition


This is another serious reason that can fail your car inspection. The wheels should be in a standard shape and suitable for your car. Besides, it’s essential to have enough thread depth because it won’t pass the vehicle inspection if it is run down significantly.

Dirty engine oil.


The engine is like the heart of your car. It needs to perform smoothly to improve the performance of your car, and it is only possible when your engine oil is clean. Moreover, dirty engine oil is not only harmful to your car but also to the environment.

If the engine oil is dirty, it exhausts more pollutants into the air, which causes environmental pollution.

Defective gas caps


Defective gas caps can cause harmful effects to the car’s exhaust system as well as the environment. Leaks in gas caps release dangerous chemicals which are very harmful to the environment.

How long does a car inspection take?


How long your car takes for an inspection will depend on your car’s state, physical condition, and the inspector. Usually, a complete inspection takes one hour or less. But It can increase
car inspection hours as a thorough inspection includes checking every sensitive part of a vehicle.

In some states, inspection procedures are stringent. So, if you are from one of the states, your car inspection will take a longer time than usual. But, on the other hand, some states don’t require SMOG tests and VIN verification. So, they will take half an hour depending on the inspectors working skills if any significant issues don’t arise.

However, we always prefer to check your vehicle with local authorities. That will be best for you, and it should not take so much time if your vehicle’s physical condition meets the requirements.

Car inspection near me


You can easily find many
car inspection stations near you. Here we will mention some of the well-known & trustable places to get car inspection service. They provide affordable and reliable services to their clients. 

  • The car saints

This is one of the most renowned car inspection firms. You can find them all around the U.S as they are providing their services all over the states. One particular thing is that they will let you know all the inspected elements of your car. 

  • The AA transit Pros inspection services

This inspection firm is known for its quality works and professionalism. They satisfy their clients by fulfilling their needs with complete accuracy. They have a vast level of service network so that the clients can reach them easily. 

  • The AAA inspection services

This is another vehicle inspection provider based in colorado. They have many years of technical knowledge. They mainly work for clients who need a new car inspection. 

  • The Autoinspect

Here’s another automobile inspection solution provider based all over the U.S. They are providing inspection services for a long time with success.

  • The National inspection services

Here is the most affordable and well-known inspection servicing firm that has 250 service points all over the nation. You can easily reach their servicing points anywhere from the country. They are providing reliable service for years with success. 

How much does a car inspection cost?


The standard
full car inspection cost for a thorough car inspection is approximately $150 to $250. This expense can vary from state to state. It’s better to go to your nearest service firm and know the average car inspection cost.

Before paying for an inspection agreement, you should know what examinations they are going to take. Besides, ensure that they won’t add any extra works without asking you because you have to pay for additional works.

Conclusion


A car inspection doesn’t take a long time if the car is in good condition. In most cases, it takes 1 hour or another half an hour maximum. But if you have you have used your car without inspection for a long time, then it might take a bit longer inspection time for your car.

Moreover, a car inspection not only checks your car’s condition but also makes sure that your friends and family or whoever in your car is safe. It also takes care of the environment by ensuring your car is not exhausting heavy pollutants in the air.

FAQs


Is there a grace period for car inspection in NY?


Yes, there is a five days grace period for car inspection in NY. The department of motor vehicles will notify you thirty days before the expiration date via your postal mail. And after the expiration of your car inspection, they will provide you a five days grace period. 

When you do a walk-around inspection, you should?


A walk-around inspection entirely depends on the inspector. It can be done on a daily basis or once a week
. It is designed to figure out daily unsafe practices that can create a severe problem over time.

How long does a car PPI take?


Depending on the car’s condition, a Pre-purchase inspection can take up to 1 and half an hour. You should inform the inspector if your vehicle. is used or new.

What things should you check during a trip?


You should check  are:

  1. Fluids
  2. Lights
  3. Wipers
  4. Wheels and tires
  5. Brake pads
  6. Leaks
  7. Safety belts
  8. Steering

Leave a Comment